Engine braking lets you slow down without using your vehicle’s brakes.
But how do you perform engine braking?
And, more importantly, why should you use it?
In this article, we’ll answer those questions after we briefly explain what engine braking is. We’ll also talk about the three common types of engine braking and answer some insightful FAQs to help you master engine braking.
This Article Contains:
- What Is Engine Braking?
- How To Perform Engine Braking
- 3 Types of Engine Braking
- 4 Reasons Why You Should Use Engine Braking
- 3 FAQs About Engine Braking
- When Should You Use Engine Braking?
- Is Engine Braking Good for Your Car?
- Why is Engine Braking Illegal?
Let’s get started.
What Is Engine Braking?
Engine braking is a process where you decrease vehicle speed without engaging your brakes.
Here, instead of pressing down on the brake pedal to engage the brakes to slow your car or truck, you simply take your foot off the accelerator pedal (or gas pedal) to reduce your speed.
However, it’s crucial to remember that engine braking only works if your vehicle is in gear. In other words, you should lay off the clutch pedal for the engine brake process to work.
Why?
Pressing down on the clutch pedal disengages your clutch.
Yes, pressing down on it disengages it, not the other way around!
And when the clutch is disengaged, the engine braking effect isn’t passed on to the vehicle’s wheels. As a result, the wheel speed stays constant.
However, when you release the clutch pedal, your car goes into gear, allowing you to decelerate using engine braking.
Now, if you want to increase the engine braking effect further, simply downshift to a lower gear right after you release the accelerator pedal.
Note: Using a higher gear (like 5th gear) when engine braking will have decreased effects compared to engine braking using a lower gear (like 1st or second gear). You’ll need to be very careful about downshifting, though.If you’re going at a high vehicle speed, abruptly downshifting to a lower gear can damage your clutch plate and transmission system.
Now that you know what engine braking is, we’ll tell you how to use engine brakes.
How To Perform Engine Braking
Engine braking is more commonly used in manual transmission vehicles since the effects of engine braking are less pronounced in automatic transmission cars.
And while engine braking involves only a few simple steps, it could take you a while to master it and do it the right way.
Here’s how you can perform effective engine braking in a manual transmission car:
- Step 1: Take your foot off the accelerator pedal (or gas pedal).
- Step 2: Press down on the clutch pedal and downshift.
- Step 3: As you take your foot off the clutch pedal, apply a slight pressure on the gas pedal for jolt-free engine braking (this is known as rev-matching).
Perform these three steps correctly, and you should be able to reduce vehicle speed using the engine brake process.
Next, let’s check out the different types of engine braking:
3 Types of Engine Braking
There are generally three types of engine braking, depending on the mechanism used to decelerate your car or truck.
They are:
A. Manifold Vacuum Braking
In a gasoline engine, engine braking works by creating what is known as a manifold vacuum.
How does a vacuum brake work?
During engine braking, the throttle valve (or throttle body valve) in your vehicle’s engine shuts off, creating a vacuum inside the engine cylinder. The vacuum gets created because the throttle body valve controls the airflow into your engine.
The vacuum that the closed throttle valve creates will impede the movement of the engine piston, causing the piston to decelerate.
As the piston decelerates, your engine speed (revs) declines. As a result, the rear tire set (in a rear wheel drive car) or front tire set (in a front-wheel-drive car) begins to slow down.
B. Exhaust Braking
The exhaust brake process is more commonly found in diesel engine vehicles than in gasoline engine vehicles. This is because a diesel engine usually doesn’t have a throttle body like a gasoline engine, so it can’t create a vacuum.
As a result, a diesel engine vehicle will need to rely on mechanisms like exhaust braking to activate its engine brakes.
How does an exhaust brake process work?
When you use this braking method, a butterfly valve inside the engine causes a restriction in the exhaust. This restriction leads to back pressure build-up, which in turn decreases your engine speed and vehicle speed.
C. Compression Braking
Compression braking (aka Jake Braking) is typically found in diesel engine trucks.
How does a compression brake work?
Compression braking works by opening the exhaust valve of the engine at the end of the compression stroke.
When the exhaust valve opens, the compressed air (and energy stored in it) gets released into the atmosphere. Since this compressed air no longer provides power to your engine, your engine speed will drop. As a result, your vehicle will slow down.
We’ve now learned about the different types of engine braking.
But why should you use engine braking in the first place?
Let’s find out.
4 Reasons Why You Should Use Engine Braking
Engine braking is beneficial to your vehicle because it helps:
A. Reduced Brake Wear
Your service brakes (main brakes) use frictional force to slow down your vehicle.
With repeated usage, your primary brake system components like the brake pad (in a drum brake system) or brake shoe (in disc brakes) and brake drum or brake rotor will start to wear due to friction.
If the wear becomes excessive, your primary braking system may get compromised.
On the flip side, engine braking doesn’t depend on frictional force to reduce your vehicle speed. And using the engine brake can decrease your reliance on your service brakes (or friction brakes), allowing you to prolong the life of your main brake system components.
B. Prevents Brake Fade
Brake fade is the loss in stopping power of your friction brakes (main brakes) due to the excessive frictional heat generated from heavy or sustained braking.
For example, you may engage the friction brakes continuously for extended periods when driving down a long and steep hill. As a result, your brake pad (or brake shoe), the brake disc (or brake drum), and other brake system components will likely overheat.
Overheated drum and disc brake system components won’t generate enough frictional force, potentially leading to brake failure.
Fortunately, you won’t need the friction brakes as much if you use the engine brake while driving downhill. And since you’re not engaging the brakes all that much, the likelihood of brake fade decreases, reducing the chances of a decline in braking system performance.
C. Increased Fuel Economy
Engine braking can offer better fuel efficiency than traditional brakes if your car or truck uses a fuel injection gasoline engine.
Why?
The throttle valve to your engine cylinder gets cut off during engine braking. As a result, combustion can’t occur, and most fuel injection vehicles shut off the fuel supply at this point.
On the flip side, when using your service brakes, the engine is still running as is, and the fuel consumption doesn’t stop.
While fuel savings due to the occasional engine braking may not seem like much, remember that these savings can add up over time. For example, during a long trip, your fuel economy or fuel efficiency can improve quite a bit when you rely on the engine brake process.
D. Improved Vehicle Control
Engine braking also helps you gain better vehicle control.
While the braking force generated by your primary braking system can be inconsistent, the engine braking effect is much smoother, giving you better control over your car or truck. This improved vehicle control during braking is helpful when driving in icy/wet conditions.
Why?
If the road’s slippery and you engage the brake pedal (or foot brake), there’s a high chance that your wheels lock up and the car or truck starts to skid. And when it skids, you may lose control of the car or truck, compromising your road safety.
Fortunately, engine braking will allow you to slow down without using your brakes. As a result, you’ll have better vehicle control when slowing down on wet or icy roads.
Now that you’ve got the basics of engine braking under your belt, let’s go over some common questions about engine braking we may have missed.
3 FAQs About Engine Braking
Here are the answers to some common questions about engine braking you should know:
1. When Should You Use Engine Braking?
Engine braking is best used to minimize brake wear when descending steep declines. This will allow you to gain more control over the car’s speed when going downhill, which is especially useful if you’re carrying or towing a heavy load.
2. Is Engine Braking Good for Your Car?
Contrary to popular belief, engine braking does not negatively affect your vehicle if executed correctly. While engine braking can generate heat, rev the engine, and possibly jerk the engine — these effects are minor. Remember, your engine was designed to handle them.
Rest assured.
There’s no cause for concern if you see a flashing brake light. Your transmission and engine will be pleasantly unphased by the activity, and it’ll only increase your skills as a driver.
Note: drivers may notice a more intense stopping power from engine braking driving a new car.
3. Why is Engine Braking Illegal?
Engine braking by large trucks is prohibited in some areas due to the loud noise it creates. Engine braking for trucks is generally prohibited when an interstate runs near residential areas or nature preserves.
Why is this necessary?
Truck drivers typically use a compression braking system (jake brake) to slow large trucks. When engaged, a jake brake opens the exhaust valves at the top of the compression stroke, resulting in a loud noise similar to the firing of a gun.
So if you have a normal commuter vehicle — rest assured. These rules don’t apply to you!
Closing Thoughts
While engine braking helps you slow down your car without the help of your main brakes, you must know how to do it right. If done correctly, engine braking offers several benefits, such as reduced brake wear and fade, fuel economy or fuel efficiency, better handling, and improved driver skill.
Now, even though engine braking can help you prolong the life of your drum and disc brakes, they’ll still need replacement at some point.
And when that time comes, just get in touch with AutoNation Mobile Service — a convenient and hassle-free mobile auto repair solution. When you book your repairs with AutoNation Mobile Service, our expert mechanics will come to your driveway to handle all your vehicle repair, maintenance, and service requirements.
